Calcined  Bauxite block abrasive grade as raw mateiral

Calcined Bauxite block abrasive grade as raw mateiral

Category:Calcined Bauxite
Parameter:abrasive, brown fused alumina,bauxite,refractory, alumina ore
Sales / Service areas:Metallurgical materials and Refractory
Product Details

Abrasive grade bauxite, the feedstock for brown fused alumina, is prepared from low silic, low alkali material that is alcined at 

 temperatures of approximately 1100 C. The minimum alumina content of 80% on a calcined basis is normally required for this 

application. And the upper limit on the silica content is 5%. Titania is ideally in the range of 2% to 4%. And low concentrations of 

alkalies are a requisite in order to minimize the formation of a glass phase. Besides these strict chemical specifications, particle 

size is especially critical for abrasive production. The upper limit on particle size is 50mm with the lower threshold set at a 100 

mesh screen size.

 

Application of our abrasive grade calcined bauxite:

Some calcined bauxite is used directly as an inexpensive abrasive product, but by far the largest amount is used as the feedstock 

for the manufacture of brown used alumina. Brown fused alumina is produced by the electrofusion of calcined bauxite in electric 

arc furnaces at temperatures in excess of 2000 

Specification of our hot seller Abrasive grade CALCINED BAUXITE:

Item name

YZCBA-83

YZCBA-85 

YZCBA-87

Al2O3

83.0%min

85.0%min

87.0%min

SiO2

7.5%-9.0%